The Source Files Could Not Be Found

  • Fix DISM The Source files could not be found in Windows 10 Method 1: Using DISM Cleanup Command. Press Windows + X and then choose Command Prompt (Admin), Open Command Prompt in. Method 2: Choose the correct DISM Source. Sometimes if the DISM command connects online to incorrectly repaired.
  • Miktex-makemf: The source file could not be found. Ask Question Asked 6 years, 8 months ago. Active 5 years, 10 months ago. Viewed 26k times 6. I m trying to compile file using TeXworks. I use fithesis class because its pre-set class by my university for creating documents.
  • This means the source files could not be found” even with the correct ISO, source files, and the right path. I also got this error without having any dependency issues. Below is the error log prompted when I tried adding packages to the Windows Image (WIM). Error: 0x800f081f.

Installation of one or more roles, role services, or features failed. The source files could not be found. Use the 'Source' option to specify the location of the files that are required to restore the feature. For more information on specifying a source location, see http://go.microsoft.com/fwlink/?LinkId=243077. During the installation of the IIS feature, you need to provide the path to source files, this will be usually the SXS folder from the OS media file as shown below. I have specified the SxS folder during the installation of IIS and made sure that, the OS version matches the ISO file that was downloaded. This is the usual procedure that we all do to install the IIS feature and it always works, but in this case, it never worked for me.

Many a time it is seen that users while trying to repair various software issue in the computer, they normally run various commands.

The commonly used command for repairing the Windows System Image is the DISM command.

But many a time it is seen that while running the DISM command viz. Dism /Online /Cleanup-Image /RestoreHealth.

After pressing the enter button, people normally encounter an error in which code is 0x800f081f or the source files could not be found.

This error is one of the weirdest errors people encounter and I am here to let you know how you too can fix this issue by yourself.

So without further ado let’s begin.

How To Fix DISM The Source Files Could Not Be Found Error?

Method 1:- Download Window 10 ISO File

The first method which I would suggest to fix the issue is downloading the Windows 10 ISO File from the Microsoft official site.

It is quite easy and simple.

The only thing which you need to do is click on this link which will eventually open the Microsoft official site and accordingly you can download the download from there only.

I believe after running the DISM command, you wouldn’t be getting the issue anymore.

Method 2:- Run Component Clean Up Command

You can also run the component clean up command to fix the DISM the source files could not be found error.

Let me tell you, it’s very easy.

The only thing you need to do is,

1. Go to your search box which is situated in the top right corner of your computer screen and type Command Prompt.

2. After opening the command prompt window, right-click on it and click run as administrator.

3. After opening the command prompt admin window, type dism.exe /online /Cleanup-Image /StartComponentCleanup.

4. After typing the component clean up command, press the enter button.

5. Restart your computer and try running the DISM command.

I hope you wouldn’t be getting the issue anymore.

Method 3:- Contact Microsoft

If you are still not able to fix the 0x800f081f error, I think you need to contact the microwave support team.

If you contact the Microsoft team personally, I believe they will eventually find solutions to your problem.

To visit the Microsoft support team page, click on this link to open the page and click on Get Started.

You can contact the team via a virtual assistant and else you can contact via call on this number 18001021100.

Moreover, you can also contact this Microsoft support page where you will find various articles and forums especially focusing on this issue.

Conclusion

So here’s comes to the end of this topic.

I believe after reading the entire article, you too can be able to fix the DISMthe source files could not be found error.

I strongly believe, out of the above three methods, one method will definitely help you to fix this issue.

Moreover, still, if you have any queries, I am very much ready to taking up questions.

I suggest you let me know in the comment section below.

SIMILAR POSTS WHICH YOU WILL LIKE,

Many a time it is seen that users while trying to repair various software issue in the computer, they normally run various commands.

The commonly used command for repairing the Windows System Image is the DISM command.

But many a time it is seen that while running the DISM command viz. Dism /Online /Cleanup-Image /RestoreHealth.

After pressing the enter button, people normally encounter an error in which code is 0x800f081f or the source files could not be found.

This error is one of the weirdest errors people encounter and I am here to let you know how you too can fix this issue by yourself.

So without further ado let’s begin.

How To Fix DISM The Source Files Could Not Be Found Error?

Method 1:- Download Window 10 ISO File

The first method which I would suggest to fix the issue is downloading the Windows 10 ISO File from the Microsoft official site.

It is quite easy and simple.

The only thing which you need to do is click on this link which will eventually open the Microsoft official site and accordingly you can download the download from there only.

I believe after running the DISM command, you wouldn’t be getting the issue anymore.

Method 2:- Run Component Clean Up Command

You can also run the component clean up command to fix the DISM the source files could not be found error.

Let me tell you, it’s very easy.

The only thing you need to do is,

1. Go to your search box which is situated in the top right corner of your computer screen and type Command Prompt.

2. After opening the command prompt window, right-click on it and click run as administrator.

3. After opening the command prompt admin window, type dism.exe /online /Cleanup-Image /StartComponentCleanup.

4. After typing the component clean up command, press the enter button.

The Source Files Could Not Be Found Net 3.5 Server 2016

5. Restart your computer and try running the DISM command.

I hope you wouldn’t be getting the issue anymore.

Method 3:- Contact Microsoft

If you are still not able to fix the 0x800f081f error, I think you need to contact the microwave support team.

If you contact the Microsoft team personally, I believe they will eventually find solutions to your problem.

To visit the Microsoft support team page, click on this link to open the page and click on Get Started.

You can contact the team via a virtual assistant and else you can contact via call on this number 18001021100.

Source

Moreover, you can also contact this Microsoft support page where you will find various articles and forums especially focusing on this issue.

Conclusion

So here’s comes to the end of this topic.

I believe after reading the entire article, you too can be able to fix the DISMthe source files could not be found error.

I strongly believe, out of the above three methods, one method will definitely help you to fix this issue.

Moreover, still, if you have any queries, I am very much ready to taking up questions.

I suggest you let me know in the comment section below.

.net 3.5 The Source Files Could Not Be Found

SIMILAR POSTS WHICH YOU WILL LIKE,