Sles 10 Sp4 Download

FC Driver for SLES 12 SP4 - RPM Fibre Channel Adapter Driver with FC-NVMe support for SLES 12 SP4 - RPM. Downloads and Documentation: QLA2340 Linux SUSE SLES (64-bit). Novell SLES 9 SP3 and SP4 Novell SLES 10 SP1 and SP2, SLES 11 (Inbox Driver only) Red Hat RHEL AS 4.7 and 4.8 Red Hat RHEL AS 5.2 and 5.3; Readme: Release Notes Previously released versions.

  1. Sles 10 Sp4 Download Free
  2. Sles 10 Sp4 Download Iso
Sp4 -->

Applies To: Windows Server 2019, Hyper-V Server 2019, Windows Server 2016, Hyper-V Server 2016, Windows Server 2012 R2, Hyper-V Server 2012 R2, Windows 10, Windows 8.1

The following is a feature distribution map that indicates the features in each version. The known issues and workarounds for each distribution are listed after the table.

The built-in SUSE Linux Enterprise Service drivers for Hyper-V are certified by SUSE. An example configuration can be viewed in this bulletin: SUSE YES Certification Bulletin.

Table legend

  • Built in - LIS are included as part of this Linux distribution.The Microsoft-provided LIS download package does not work for this distribution, so do not install it.The kernel module version numbers for the built in LIS (as shown by lsmod, for example) are different from the version number on the Microsoft-provided LIS download package. A mismatch doesn't indicate that the built in LIS is out of date.

  • ✔ - Feature available

  • (blank) - Feature not available


SLES12+ is 64-bit only.

Sles 10 sp4 download isoSles 10 sp4 download free
FeatureWindows Server operating system versionSLES 15 SP1SLES 15SLES 12 SP3-SP5SLES 12 SP2SLES 12 SP1SLES 11 SP4SLES 11 SP3
Core2019, 2016, 2012 R2
Windows Server 2016 Accurate Time2019, 2016
Jumbo frames2019, 2016, 2012 R2
VLAN tagging and trunking2019, 2016, 2012 R2
Live migration2019, 2016, 2012 R2
Static IP Injection2019, 2016, 2012 R2✔Note 1✔Note 1✔Note 1✔Note 1✔Note 1✔Note 1✔Note 1
vRSS2019, 2016, 2012 R2
TCP Segmentation and Checksum Offloads2019, 2016, 2012 R2
SR-IOV2019, 2016
VHDX resize2019, 2016, 2012 R2
Virtual Fibre Channel2019, 2016, 2012 R2
Live virtual machine backup2019, 2016, 2012 R2✔ Note 2,3,8✔Note 2,3,8✔ Note 2,3,8✔ Note 2,3,8✔ Note 2,3,8✔ Note 2,3,8✔ Note 2,3,8
TRIM support2019, 2016, 2012 R2
SCSI WWN2019, 2016, 2012 R2
PAE Kernel Support2019, 2016, 2012 R2N/AN/AN/AN/AN/A
Configuration of MMIO gap2019, 2016, 2012 R2
Dynamic Memory - Hot-Add2019, 2016, 2012 R2✔ Note 6✔Note 6✔ Note 6✔ Note 6✔ Note 6✔ Note 4,5,6✔ Note 4,5,6
Dynamic Memory - Ballooning2019, 2016, 2012 R2✔ Note 6✔ Note 6✔ Note 6✔ Note 6✔ Note 6✔ Note 4,5,6✔ Note 4,5,6
Runtime Memory Resize2019, 2016✔ Note 6✔ Note 6✔ Note 6✔ Note 6
Hyper-V-specific video device2019, 2016, 2012 R2
Key/value pair2019, 2016, 2012 R2✔ Note 7✔ Note 7
Non-Maskable Interrupt2019, 2016, 2012 R2
File copy from host to guest2019, 2016, 2012 R2
lsvmbus command2019, 2016, 2012 R2
Hyper-V Sockets2019, 2016
PCI Passthrough/DDA2019, 2016
Generation 2 virtual machines
Boot using UEFI2019, 2016, 2012 R2✔ Note 9✔ Note 9✔ Note 9✔ Note 9✔ Note 9✔ Note 9
Secure boot2019, 2016


Sles 10 Sp4 Download Free

  1. Static IP injection may not work if Network Manager has been configured for a given Hyper-V-specific network adapter on the virtual machine. To ensure smooth functioning of static IP injection please ensure that Network Manager is turned off completely or has been turned off for a specific network adapter through its ifcfg-ethX file.

  2. If there are open file handles during a live virtual machine backup operation, then in some corner cases, the backed-up VHDs might have to undergo a file system consistency check (fsck) on restore.

  3. Live backup operations can fail silently if the virtual machine has an attached iSCSI device or direct-attached storage (also known as a pass-through disk).

  4. Dynamic memory operations can fail if the guest operating system is running too low on memory. The following are some best practices:

    • Startup memory and minimal memory should be equal to or greater than the amount of memory that the distribution vendor recommends.

    • Applications that tend to consume the entire available memory on a system are limited to consuming up to 80 percent of available RAM.

  5. Dynamic memory support is only available on 64-bit virtual machines.

  6. If you are using Dynamic Memory on Windows Server 2016 or Windows Server 2012 operating systems, specify Startup memory, Minimum memory, and Maximum memory parameters in multiples of 128 megabytes (MB). Failure to do so can lead to Hot-Add failures, and you may not see any memory increase in a guest operating system.

  7. In Windows Server 2016 or Windows Server 2012 R2, the key/value pair infrastructure might not function correctly without a Linux software update. Contact your distribution vendor to obtain the software update in case you see problems with this feature.

  8. VSS backup will fail if a single partition is mounted multiple times.

  9. On Windows Server 2012 R2, Generation 2 virtual machines have secure boot enabled by default and Generation 2 Linux virtual machines will not boot unless the secure boot option is disabled. You can disable secure boot in the Firmware section of the settings for the virtual machine in Hyper-V Manager or you can disable it using Powershell:

Sles 10 Sp4 Download Iso

See Also